Before Cleansing

After soaking in ACHM02 cleaning agent at 55°C for 5 hours, take it out.

Scrub gently with PE bristles. Then rinse with water.

After washing with water, soak in reducing agent at 50°C for 10 minutes. (to remove the surfactant bonded to the resin from the surface)

After Cleansing

Discussion of results

5.1 No. 3 balls containing fluorescent dyes cannot be washed together with No. 1, 2, and 4 white balls. There will be problems with fluorescent dye migration.

5.2 The soaking time of No. 1 ball and No. 2 ball should be shortened to 3 hours. To reduce the bond between the surface active agent and the golf ball resin surface. It can also reduce the soaking time of reducing agent.

5.3 Pay attention to the fluorescent agent of the No. 3 ball. Will the coloring be reduced due to too long soaking in detergent? Should the soaking time be changed from 5 hours to 3 hours?

5.4 Modifying the additive ratio of the hardening ink cleaning agent ACHM02 will reduce the bond between the surface active agent and the golf ball resin surface, and keep the golf ball resin surface clean and white without soaking in the reducing agent. However, the No. 1 and No. 2 balls can be completely cleaned, but the No. 4 ball has residues due to the large ink coverage.