1. Test SGC 01 RDC 02 Thermoplastic Rubber TPR Decomposer Plastic Decomposer HCL H2SO4 DEBD ACHM01 SynGC 04 NAOH NGC 02 … etc. are invalid

2. Heating is ineffective (including heating and soaking with acid, alkali and many medicaments are ineffective)

3. The newly developed RSS01 can be separated by soaking at room temperature for 24 hours

Laboratory test RSS01, the net bubble time is about 20~24 hours, and the separation rate is 100%.

But a simple physical force is required to separate the metal from the rubber.

RSS01 Loss Rate Calculation
RSS 01 106.44 g Rubber Ferrous Sheet 104.72 g
24 hour Rubber plate weighs 113.99 g
24 hours RSS01 weighs 97.22 g
Air evaporation 0.05g (RSS 01 about 0.047% evaporation)
Potion absorbed by RUBBER PLATE 9.72 g (RSS 01 about 8.709% less absorbed) total less 9.32 g (total less 8.756%)

The RSS01 agent has low toxicity to humans, but may cause damage to reproductive ability or fetus. It is recommended not to touch the human body during the operation.
With the proper equipment this should be possible.

The suggested process is:

1. The medicine and the workpiece are mixed at a ratio of 1:1 and soaked at room temperature for 24 hours.

2. Take out the workpiece and drain it (to reduce the loss of medicine). (The ventilation device needs to be turned on when the airtight barrel is opened)

3. Wash the workpiece with water. (Reduce the chance of human contact) (Open the ventilation equipment when the airtight barrel is opened)

4. Separation by rolling with an octagonal drum, or separation of metal and rubber by rolling and pressing.

5. The reduced medicine can be supplemented.