DESCRIPTION

• Does not contain toxic halogen elements such as fluorine, chlorine, bromine, and iodine.
• It does not contain silicon, and it does not form hard-to-remove silicon decidua.
• It does not contain benzene aromatic organic solvents and does not generate odorous gases during high-temperature cleaning.
• Easy rinsing off, rinse with clean water, clean quickly, no residue.
• No flash point, contact with sparks at normal operating temperatures will not cause combustion.

SAFETY DATA SHEET

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY UNDERTAKING

Trade name: PowerWashTM Heavy-Duty Grease Remover C11plus
Producer: EverDependUp Co., Ltd.
Address: 3F., No.32, Keya Rd., Daya Dist., Taichung City 428, Taiwan (R.O.C.)
TEL: +886-4-25600139
FAX: +886-4-25600149
Emergency phone: +886-928-178387

2. HAZARDS IDENTIFICATION

GHS Hazard category:
CORROSIVE TO METALS: 1
ACUTE TOXICITY – ORAL: 4
ACUTE TOXICITY – DERMAL: 4
ACUTE TOXICITY – INHALATION: 4
SKIN CORROSION/IRRITATION: 1
EYE DAMAGE/IRRITATION: 1
HAZARDOUS TO THE AQUATIC ENVIRONMENT - ACUTE HAZARD: 1

GHS Symbol:

Signal word: Danger

Hazard statement:
May be corrosive to metals.
Harmful if swallowed.
Harmful in contact with skin.
Harmful if inhaled.
Causes severe skin burns and eye damage.
Causes serious eye damage.
Very toxic to aquatic life.

Prevention
Keep only in original container.
Do not eat, drink or smoke when using this product.
Wash hands thoroughly after handling.
Wear protective gloves/clothing.
Wear eye/face protection.
Use only outdoors or in a well-ventilated area.
Avoid breathing dust/fume/gas/mist/vapours/spray.
Wash thoroughly after handling.

Response
Absorb spillage to prevent material damage.
IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
Rinse mouth.
IF ON SKIN: Wash with plenty of soap and water.
IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing.
Call a POISON CENTER or doctor/physician if you feel unwell.
Wash contaminated clothing before reuse.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists, get medical advice/attention.
Wash hands after handling.
Collect spillage.

Storage
Store in corrosive resistant container or with a resistant inliner.
Store in cool/well-ventilated place.
Store locked up.

3. COMPOSITION/INFORMATION ON INGREDIENTS

4. FIRST AID MEASURES

4.1 Eye contact:
- Rinse immediately with plenty of water for 15 minutes.
- If irritation persists consult a doctor/medical service.

4.2 Skin contact:
- Wash immediately with lots of water and soap for 15 minutes.
- Remove clothing while washing.
- Do not remove clothing if it sticks to the skin.
- If irritation persists consult a doctor/medical service.

4.3 After inhalation:
- Remove the victim into fresh air.
- Unconscious: maintain adequate airway and respiration.
- If breathing problems develop: consult a doctor/medical service.

4.4 After ingestion:
- Immediately after ingestion: give lots of water to drink.
- Never give water to an unconscious person.
- Allow vomiting.
- If you feel unwell: consult a doctor/medical service.

5. FIRE FIGHTING MEASURES

5.1 Suitable extinguishing media:
-Water spray
-Polyvalent foam
-Alcohol foam
-BC powder
-Carbon dioxide

5.2 Special protective equipment for firefighters:
- Heat/fire exposure: compressed air/oxygen apparatus of gas-tight suit.

6. ACCIDENTAL RELEASE MEASURES

Personal Protection:
Respiratory: Gauze mask. Eye: Approved safety glasses with side shield. Clothes: Protective work clothes. Additional Comments: Eye washes and safety showers should be available. Educate and train employees in the use of this product.

Environmental Precaution:
Should not be allowed to enter drain or watercourses.

Methods for cleaning up:
Contain spill with inert material. Absorb in vermiculite, dry sand or earth. Place in the container for disposal according to local regulation.

7. HANDLING AND STORAGE

Handling: Mechanical ventilation or local exhaust ventilation is required. Avoid all unnecessary.

Storage Conditions: Keep contains tightly closed. Keep away from heat and light.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Exposure Limit Comments: None established.
Engineering controls: Mechanical ventilation or local exhaust ventilation is required. Use protective gloves made of Butyl rubber. Wear tightly fitting safety goggles. Launder cloths before re-use.

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Brown liquid
Odor: Sweet with ammonia flavors.
pH Value: >13.0
Non-Flammable
Specific Gravity (H2O is: 1): 1.112
Boiling point: >100 C
Flash point: N.D. (closed cup)

10. STABILITY AND REACTIVITY

Thermal decomposition: No thermal decomposition when stored and handled correctly.

11. TOXICOLOGICAL INFORMATION

Irritation: Skin irritation test(rabbit)：corrosive.
Sensitization: Non.
Health effects: Irritation to eyes and skin. Long-term exposure may cause kidney and/or liver damage.

12. ECOLOGICAL INFORMATION

Environmental Fate: (After neutralization)
This material is not expected to evaporate significantly. It may leach into groundwater or biodegrade to a moderate extent. BCF is estimated to be less than 100. It is expected to be readily degraded by reaction with photochemically produced hydroxyl radicals in the air with a half-life of less than 1 day.

Environmental Toxicity: (After neutralization)
The LC50/96-hour values for fish are over 100 mg/l. Not expected to be toxic to aquatic life.

13. DISPOSAL CONSIDERATIONS

Dispose in safe map in accordance with local/national regulations. Completely empty contents of drums before discarding.

14. TRANSPORT INFORMATION

UN Number: 1760
UN shipping name: Corrosive liquid, n.o.s.
Transport Hazard Classification: 8
Packing group: III
Marine pollutant: NO
Special provisions: 223. 274.

15. REGULATION INFORMATION

Labor Safety and Health Rules
Dangerous and Harmful Material of general rules
Labor operating environment allowable concentration of harmful substances in the air standard
Road traffic safety rules
Industrial Waste Storage and Disposal and Facility Standards
Public dangerous goods and flammable pressurized gases Establishment Standards and Safety Management Measures
International regulations

16. OTHER INFORMATION

References: Labor Safety and Health Council of Labor Affairs Department hazardous materials and hazardous material labeling and Liberal rule
Safety and Health Technology Center Taiwan 2008 GHS Implementation Update
EPA toxic chemicals labeling and material safety data sheet management approach
Watchmaking unit: EverDependUp Co., Ltd. R & D
Phone: +886 4 25600139
Tabulation Date: 2024/06/06
Lister: Chen, Ying-Chi
The information only concerns the above mentioned product as supplied and may not be valid if used with other products or in any process. It remains the user's own responsibility to make sure that the information is appreciate and complete for the special use of this product.